GravelDIY.com is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Calculate Gravel Requirements
1 Measuring tape
2 Wheelbarrow
3 Shovel
4 Rake
5 Calculator
6 Garden hose
7 Safety glasses
8 Work gloves
9 Dust mask
10 Safety boots

How to Calculate Gravel Requirements

Master the Art of Calculating Gravel Requirements with These Simple Tips

Calculating gravel requirements for a project can seem like a daunting task, but with a little bit of math and some basic information about the project, it can be a fairly straightforward process. Here is a step-by-step guide on how to calculate gravel requirements for your next project.

Step 1: Determine the Area to be Covered
The first step in calculating gravel requirements is to determine the area that needs to be covered. This can be done by measuring the length and width of the area in feet and then multiplying those two numbers together to get the total square footage. For example, if the area to be covered is 10 feet by 20 feet, the total square footage would be 200 square feet.

Step 2: Determine the Depth of Gravel Needed
The next step is to determine the depth of gravel that is needed for the project. This will depend on the type of project you are working on and the intended use of the gravel. For example, if you are creating a driveway, you may need a depth of 4 inches, whereas if you are creating a garden path, a depth of 2 inches may be sufficient. Once you have determined the depth needed, convert it to feet.

Step 3: Calculate the Volume of Gravel Needed
To calculate the volume of gravel needed, you will need to multiply the area to be covered by the depth of gravel needed. This will give you the total volume of gravel required in cubic feet. For example, if the area to be covered is 200 square feet and the depth of gravel needed is 4 inches (which is 0.33 feet), the total volume of gravel required would be 66 cubic feet (200 x 0.33 = 66).

Step 4: Convert Cubic Feet to Cubic Yards
Most gravel is sold by the cubic yard, so you will need to convert the total volume of gravel required from cubic feet to cubic yards. To do this, divide the total volume of gravel required by 27 (which is the number of cubic feet in a cubic yard). Using the example above, 66 cubic feet of gravel would be equal to 2.44 cubic yards (66 รท 27 = 2.44).

Step 5: Order the Gravel
Now that you know how much gravel is required for your project, you can order the appropriate amount from your supplier. Be sure to order a little bit extra to account for any settling or compaction that may occur once the gravel is spread out.

In conclusion, calculating gravel requirements for a project is a simple process that involves determining the area to be covered, the depth of gravel needed, and then calculating the volume of gravel required. By following these steps, you can ensure that you order the correct amount of gravel for your project and avoid any unnecessary delays or expenses.