GravelDIY.com is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Install Gravel for a Dry Well
1 Shovel
2 Rake
3 Wheelbarrow
4 Tamper
5 Level
6 Landscape fabric
7 Gravel

How to Install Gravel for a Dry Well

Step-by-Step Guide: Installing Gravel for a Dry Well

Installing gravel for a dry well is a great way to manage excess water in your yard. It’s a simple process that you can do yourself with just a few tools and some elbow grease. Here are the steps to follow:

1. Choose the location: The first step is to choose the location for your dry well. Look for an area that is away from the foundation of your house and any other structures. You should also avoid areas with underground utilities or septic systems.

2. Dig the hole: Once you have chosen the location, dig a hole that is approximately 3 feet deep and 2 feet wide. Make sure the sides are straight and smooth.

3. Add a layer of gravel: Add a layer of gravel to the bottom of the hole. This layer should be about 6 inches deep.

4. Install the dry well: Install the dry well in the center of the hole. The dry well should be made of perforated plastic or concrete and should be about 2 feet in diameter.

5. Add more gravel: Fill the area around the dry well with more gravel. The gravel should be about 6 inches deep.

6. Cover the dry well: Cover the dry well with a layer of landscape fabric. This will prevent dirt and debris from getting into the well.

7. Add more gravel: Add another layer of gravel on top of the landscape fabric. This layer should be about 6 inches deep.

8. Add a cap: Add a cap to the top of the dry well. This will prevent debris from getting into the well.

9. Backfill: Backfill the hole with the dirt that you removed earlier. Make sure the soil is packed tightly around the dry well.

10. Finish up: Finally, add some decorative rocks or plants around the dry well to make it blend in with your landscaping.

Congratulations! You have successfully installed a gravel dry well.